Greek
technissis.gr > Products > Leister > Tools > HEMTEK ST
HEMTEK ST


The HEMTEK ST is designed for use in a wide range of applications and is particularly intuitive to use. Once the machine is mounted, you can start welding immediately. Preparing or welding with a hot air hand welding machine afterwards is no longer necessary. From now on, you can quickly weld the hems of promotional banners or tarpaulins - from corner to corner - with ease.

Thanks to the foot pedal, both hands remain free to guide the material. High welding quality and a stress-free welding experience guaranteed.

  • Welding speeds of up to to 12 m (39 ft.) per minute
  • Very strong blowers
  • Tool-free setting of the hem guide
  • One hem guide – three applications: Closed: 20/30/40 mm (0.8/1.2/1.6 inches); Open: Up to 100 mm (4 inches); With piping
  • Easy-to-use: Thanks to the foot pedal, your hands are free to guide the material
  • Everything in a single step: No need to weld with hot air hand tools afterwards
  • All welding parameters are adjustable
  • Cooldown mode
  • Can be mounted onto nearly any table: freely adjustable, quick-clamp lock
Specifications
  HEMTEK ST / 230 V / 40 mm / 3450 W / EU-plug HEMTEK ST / 230 V / 30 mm / 3450 W / EU-plug HEMTEK ST / 230 V / 20 mm / 2350 W / EU-plug
Article No.:   157.860 157.861 157.862
Attribute Unit Value Value Value
Width of welding nozzle mm 40 30 20
Voltage V~ 230 230 230
Power W 3450 3450 2350
Frequency Hz 50/60 50/60 50/60
Temperature °C 100 - 650 100 - 650 100 - 650
Air volume % 1 - 10 1 - 10 1 - 10
Drive Speed m/min 0.8 – 12 0.8 – 12 0.8 – 12
Noise emission level LpA (dB) 70 (K = 3 dB) 70 (K = 3 dB) 70 (K = 3 dB)
Size (L × W × H) mm 433 × 350 × 600 433 × 350 × 600 433 × 350 × 600
Weight (incl. table mounting) kg 27 27 27
Conformity mark  
Protection class I  

Similar products


SEAMTEK 900 AT VARIANT T1 Overlap VARIANT T1 TAPE
SEAMTEK 900 AT VARIANT T1 Overlap VARIANT T1 TAPE
UNIPLAN 500 UNIPLAN 300
UNIPLAN 500 UNIPLAN 300